Quick Start > Manual Guide (Post Installation)


Manual Guide (Post Installation)


 

Congratulations! You have now completed the installation of AspDotNetStorefront v7.0.

Before going live, below is a quick overview on the next steps you need to go over, which are ALL available in the AspDotNetStorefront Manual  :

  1. Please review the following Security Best Practices below which are available in:

    AspDotNetStorefront Manual path : Installation and Setup/Security Best Practices

  1. If you want to install AspDotNetStorefront in a Remote server, please read and follow the procedures below:

    AspDotNetStorefront Manual path : Installation and Setup/Installing the Store

  1. Now that your Admin Site is ready, login to customize the functions and utilize the features of AspDotNetStorefront.

   AspDotNetStorefront Manual path : Setting Up Your Store

Then you can add, modify, delete your :

Most importantly:

 

  1. Now that you have gone through the basic functions of AspDotNetStorefront, maximize the potential performance of your store by implementing these Advanced functions:

 AspDotNetStorefront Manual path : Advanced Management

 

  1. Every configuration that you make in your admin site, will reflect in your store site. To access your actual-to-be store, click on the link at the left corner of your admin site (e.g. AspDotNetStorefront Admin for : AspDotNetStorefront), and your store site will pop up in a separate window.

 

 

  1. To change the skin of your store, learn the simple steps of Skinning Tutorial, which is also available in AspDotNetStorefront Manual in PDF format. Additional information online are :

 AspDotNetStorefront Manual path : /Designing Your Store

 

  1. To keep your admin and store site's smooth performance, please make sure you accomplish these maintenance procedures regularly:

 AspDotNetStorefront Manual path : /Maintaining Your Store

 

  1. If you encountered errors after installation and during the customization of your admin site, please refer to these tips and articles:

AspDotNetStorefront Manual path : /Troubleshooting Your Store

 

  1. Upon completion of setting up the basic and desired functions, you are now ready to Go Live!

To go Live, here's what you need to follow:

1.    You must have installed an SSL and enable it.

2.    Then set AppConfig:LiveServer=your domain name (e.g. mystore.com). However, the site would NOT go "live" for SSL, etc. until you are running on that actual domain.

3.    Set also AppConfig:RedirectLiveToWWW=true IF their SSL cert is on www.yourdomainname.com 

4.    Turn ON your payment gateway so you can process credit card on a live mode. To do that, login to the admin site and then click on Run Config Wizard (you should be in the HOME page, under COMMON LINKS).

5.    Set your AppConfig:UseLiveTransactions to TRUE, and then Save the settings.

6.    Click Reset Cache.

NOTE: If your store is on a subdomain, set AppConfig:LiveServer=subdomain.yourdomainname.com, and set AppConfig:RedirectLiveToWW=false!

  

Click here for details on Enabling SSL and setting your AppConfig Parameters

 

 

  1. If you need further assistance, here are the complete contact Info for AspDotNetStorefront:

PRE-SALES:

sales@aspdotnetstorefront.com

TECHNICAL SUPPORT:

Open HelpDesk

CUSTOM DEVELOPMENT REQUESTS:

customdev@aspdotnetstorefront.com

CUSTOM SKIN DESIGN:

skindesign@aspdotnetstorefront.com

SEARCH ENGINE OPTIMIZATION CONSULTING:

seo@aspdotnetstorefront.com

GETTING A MERCHANT ACCOUNT:

merchantaccounts@aspdotnetstorefront.com

VERIFIED BY VISA/MASTERCARD SECURE INFO:

vbv@aspdotnetstorefront.com

 

 


   


   System Requirements | Security Best Practices | Support & Upgrade Contracts | Downloads | Contact Us

   Copyright © 1995-2006 All rights reserved.